an extremely tough premium quality protective and decorative finish for interior walls and trim work. Intended Uses • Used as a decorative and protective finish on interior primed masonry surfaces. • It can also be used directly onto interior surfaces such as hard and soft woods, melamine, mild steel, galvanised steel, aluminium and PVC. • Ideal for furniture, doors, skirtings and wall surfaces in kitchens and bathrooms. Features & Benefits • Hero Ingredient: Polytough, unique polyurethane enamel that cross-links to form a resilient protective barrier that makes VELVAGLO heat, steam, chip and stain resistant. • Dries to an attractive semi-gloss satin sheen finish which is completely washable, tough and mar resistant. • Unique gel formulation - does not drip during brush application and allows higher than normal build per coat. • High opacity. • Built in primer allows direct to surface application on correctly prepared selected interior surfaces. • No undercoat necessary for masonry surfaces after priming. • No added lead. • 12 Year Quality Guarantee. (Interior application, refer to terms & conditions at www.plascon.com) . Product Information Appearance Colours Tint Bases Generic type Volume Solids Recommended DFT Recommended WFT Theoretical spreading rate Practical spreading rate TVOC Satin sheen White (VLO 1) and standard colours as per colour card. Also available in a wide range of INSPIRED COLOUR tints. Pastel Tint Base (TVG 1000), Deep Tint Base (TVG 2000) and Transparent Tint Base (TVG 3010) Polyurethane alkyd 45% 25 – 40 μm 56 – 89 μm 12.9 m²/L @ 35 μm DFT. This serves as a guide only. The practical spreading rate will vary depending on the profile of the substrate, as well as the application technique and tools used. White: 435 g/L, Pastel & Transparent bases: 409 g/L, Deep base: 421 g/L Application Details Mixing Ready for use by brush or roller. Stirring is not recommended since it will break down the gel structure. If stirred, allow to stand for 8 hours for gel to recover. Method Brush, mohair roller or spray. Thinning Ready for use for brush and mohair roller application. For spray application thin approximately 10 parts VELVAGLO to 1 part SPRAYING THINNER (TH 3) or MINERAL TURPENTINE (AZH 1) by volume. NOTE: Thinning will destroy the non drip properties. Cleaning Drying time MINERAL TURPENTINE (AZH 1) or POLYCELL BRUSH CLEANER (502205). Touch dry: 4 h @ 23 °C Over coating: 16 h @ 23 °C

All surface water-based primer • For use on ceramic tiles, wood, glass, PVC, etc. • For interior/ exterior use