DEWALT
Showing 1–28 of 39 results
R6,999.00
DCD805 Impact Drill:
Chuck size: 13mm
Torque: 90Nm
No-load speed: 0-2000Rpm
Impact rate: 0-34000Bpm
DCF809 Impact Driver:
Bit holder 6.35mm Hex
Max. torque: 190Nm
Max. bolt diameter: M12
Impacts per minute: 0-3200Bpm
No-load speed: 0-2800Rpm
Includes 2 x 3Ah batteries, 1 x charger & 2 x TSTAK cases
3 Year Warranty (registration required)
Read more
R999.00
DCBP034
Experience enhanced power, efficiency and lifespan unlike any other cordless tool battery. They're compatible with the full 18V XR DEWALT range of tools and chargers, for a whole new kind of portable power.
50% MORE POWER: A power tool battery for the toughest jobs, with higher voltage and higher current under load.
2X LIFESPAN: Reduced capacity loss means the DEWALT POWERSTACK battery lasts twice as long.
18V Lithium Ion
POWERSTACK™
1.7Ah Capacity
1 Year Warranty
Add to cart
R4,499.00
DCS565NT
Brushless Motor
165mm Blade
LED work light
Blade Bore: 20mm
No Load Speed (1st): 4950 rpm
Bevel Capacity: 50 deg
Depth of Cut at 90º: 55 mm
Excludes Battery And Charger
1 Year Warranty
Read more
R2,699.00
Read more
DCF840NT
Voltage: 18V
Motor Type: Brushless
Bit Holder: 6.25mm Hex
Output Power: 380 W
Max Torque (Hard): 192 Nm
Impacts per Minute: 0 - 4200 bpm
No Load Speed (1st): 0 - 3200 rpm
Case Included: TSTAK Case
Battery and Charger not included
R3,799.00
DCF891NT
Read more
Voltage: 18V
Motor Type: Brushless
Bit Holder: 1/2" Hog Ring
Max Torque (Hard): 812Nm
Torque (Medium Mode): 406Nm
Torque (LowMode): 136Nm
Max breakaway torque: 1084Nm
Impacts per Minute: 0–3250 ipm
No Load Speed (1st): 0–2000 rpm
Case Included: TSTAK Case
Batteries and Charger not included
R4,699.00
DCS386NT
Stroke Length: 28,6 mm
No Load Stroke Rate: 0 - 3000 rpm
Depth of Cut: Wood - 300 mm
Depth of Cut: Steel & Pipes - 130 mm
Depth of Cut: PVC - 160 mm
EXCLUDES BATTERY AND CHARGER
Read more
R3,999.00
DCV584L
Read more
Voltage: 18V or 54V
Power: 300 W
Tank volume: 7,5 L
Max. airflow: 15,9 L/sec
Negative pressure: 70 mbar
Protection class: IPX4
Hose nozzle diameter: 32 mm
Battery and Charger not included
R2,599.00
D25133K
Var/Rev: 0-1500Rpm
Impact rate: 0-5500Bpm
Impact energy: 2.6 Joule
SDS concrete capacity: 26mm
Includes handle, depth gauge and carry case
3 Year warranty (registration required)
Add to cart
R6,999.00
DCD999T1
Voltage: 54v Flexvolt
Chuck: 13mm
Max Torque (Hard): 112Nm
Max Torque (Soft): 66Nm
No Load Speed (1st): 0-500rpm
No Load Speed (2nd): 0-1500rpm
No Load Speed (3rd): 0-2250rpm
Impact Rate (1st Gear): 0-8500bpm
Impact Rate (2nd Gear): 0-25500bpm
Impact Rate (3rd Gear): 0-38250bpm
Drilling Capacity: Wood: 55mm | Metal: 15mm | Masonry: 13mm
Read more
R2,699.00
DWE496
High motor durability of 500 hrs, and high brush life of 250hrs.
Optimal body gripping, low weight, low vibration.
2600W input power suitable for heavy/intense application.
Improved quality of armature with birdcage solution.
3 holes- side handle.
Stock removal, back gouging, surface grinding, concrete cutting.
No Load Speed (1st): 6500rpm
Disc Size: 230MM
Spindle Thread: 230mm
Lock on switch: No
Add to cart
R3,399.00
DCD708S2T
Ultra-compact 160mm length
13mm Keyless chuck
Var/Rev 2-speed: 0-450/1650Rpm
Maximum torque: 65Nm
T-stak carry case and belt clip included
3 Year warranty (registration required)
Add to cart
R7,499.00
DWCOMBO67
Impact Drill (DCD796): New XR brushless motor • 13mm Metal keyless chuck • Var/Rev 2-speed: 0-550/0-2000Rpm • Max impact
rate: 34000Bpm • Max torque: 70Nm • TSTAK industrial carry case included • 3 Year warranty (registration required)
Angle Grinder (DCG409L2): Works off 18V or 54V Li-ion batteries • Soft start to maximum speed: 9000Rpm • Electronic clutch and brake • Rubber over moulded grips • TSTAK industrial carry case included • 3 Year warranty (registration required)
Add to cart
R4,399.00
DCS334NT
Excludes battery and charger
Ideal for woodworkers and shopfitters with a 4-position pendulum action and keyless blade change system
Stroke length: 26mm
0-3200Spm
Intelligent variable speed trigger
Depth of cut: 135mm (wood), 10mm (metal)
3 Year warranty (registration required)
Add to cart
R4,399.00
Add to cart
DCS355NT
Excludes battery and charger
Suitable for cutting, scraping and sanding
Universal accessory adapter
Variable speed: 0-20000Opm
Quick-change Accessory System allows attachments to be changed quickly without use of tools
LED light illuminates dark work surfaces for accurate cutting
3 Year warranty (registration required)
R4,599.00
DW714-ZA
Input Power: 1650W
No Load Speed: 4600Rpm
Blade Diameter: 255mm
Blade Bore: 30mm
Bevel Capacity: 45 °
Mitre Capacity (right/left): 47/52 °
Depth of Cut at 90º: 89 mm
Depth of Cut at 45º: 50 mm
Cutting Capacity at 90°/45° (W x H): 67 x 68 mm
Cutting Capacity at 90°/90° (W x H): 95 x 68 mm
Max. Cutting Capacity at 45°/45°: 70 x 40 mm
Read more
R1,199.00
DEWALT XR 2.0Ah Li-Ion Battery Technology offers extended runtime and optimised power to complete applications quickly
LED State of Charge Indicator helps manage pack charging
Lightweight design provides the user with upgraded runtime without increasing the size or weight over the 18V 1.5Ah battery pack
No memory effect and virtually no self-discharge for maximum productivity & less downtime
Compatible with all DEWALT XR Li-Ion 18V Tools
Excellent electrical characteristics
No memory effect
1-Year Warranty
Read more
R1,399.00
DCB182-XJ
LED State of Charge Indicator helps manage pack charging.
No memory effect and virtually no self-discharge for maximum productivity & less downtime.
Compatible with all DEWALT XR Li-Ion 18V Tools.
Protection against overheat, overload, and deep discharge conditions increase battery life.
No memory effect.
Add to cart
R1,899.00
DCB184-XJ
Compatible with all 18V Li-ion machines
LED charge indicator
Fully charged in 75 minutes
Overload and overheat protection
1 Year Warranty
Add to cart
R4,899.00
DCD709L2
New XR brushless motor
13mm Metal keyless chuck
Var/Rev 2-speed: 0-450/1650Rpm
Maximum impact rate: 28050Bpm
Maximum torque: 65Nm
Ultra-short body: 175mm
Carry case included
3 Year Warranty (registration required)
Add to cart
R3,999.00
DCD796
Brushless Motor Technology for excellent efficiency
Two speed all metal transmission for increased runtime and longer tool life
New 3 Position LED torch, High/Medium/Low settings with High output 20min LED delay lighting up your workplace
15 position adjustable torque control for consistent screw driving into a variety of materials
Li-Ion battery with a state of charge indicator
Steel belt hook and magnetic bit holder
Ultra-compact, lightweight design allows use in confined spaces
CHUCK: 13mm
MAX TORQUE (HARD): 70Nm
MAX TORQUE (SOFT): 27Nm
OUTPUT POWER: 460W
NO LOAD SPEED (1ST): 0-550rpm
NO LOAD SPEED (2ND): 0-2000rpm
IMPACT RATE (1ST GEAR): 0-9350bpm
IMPACT RATE (2ND GEAR): 0-34000bpm
DRILLING CAPACITY (WOOD): 40mm
DRILLING CAPACITY (METAL): 13mm
DRILLING CAPACITY (MASONRY): 13mm
3 Year warranty (registration required)
Add to cart
R5,799.00
DCD996P1-QW
NEW Automatic high-speed hammer drill driver at 38,250 BPM increasing user's masonry drilling speed of application.
NEW 3 Position LED torch, High/Medium/Low settings with High output 20min LED delay lighting up your workplace.
Tough 3 speed all metal transmission for increased runtime and longer tool life.
Electronic Clutch with 11 positions adjustable torque control for optimised precision when screw driving.
Includes a TSTAK Compatible Kitbox to organise your tools and accessory storage.
13mm ratcheting keyless chuck with automatic spindle lock for fast bit changes.
Efficient intelligent trigger allowing total control over all applications.
Improved grip design providing greater application control and maximum comfort.
Li-Ion battery packs allow for superior insertion and removal with a state of charge indicator.
Steel belt hook and magnetic bit holder ensure strong storage solutions.
Part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster.
Includes one battery, charger, and a TSTAK carry case, all TSTAK storage boxes and containers can easily be stacked and attached for quick organization and storage in the shop, or on the job site.
1-Year Warranty
Read more
Annual Magazine 2023, Cordless drills, DEWALT, Festive Savings 2024, Power Tools, POWER TOOLS, Power Tools
R4,499.00
DCF809L2
Only 125mm in length, allowing you to get into even smaller spaces.
Only 1.0kg (tool only) for ultimate portability.
Up to 190Nm torque allows you to achieve tough applications.
An efficient brushless motor delivers high performance, extends tool life, and allows for a much shorter design.
‘Drop and Load‘ bit holder for one-handed operation.
MOTOR TYPE: Brushless
BIT HOLDER: 6.25mm Hex
OUTPUT POWER: 300W
MAX TORQUE (HARD): 190 Nm
MAX. BOLT DIAMETER: M12
IMPACTS PER MINUTE: 0-3200 bpm
NO LOAD SPEED (1ST): 0 -2800 rpm
3-year warranty (registration required)
Add to cart
R3,199.00
DCG409NT
Excludes battery and charger
Works off 18V or 54V Li-ion batteries
A soft start to max speed 9000 Rpm with electronic clutch and brake
Rubber over-moulded grips
TSTAK industrial carry case included
3 Year warranty (registration required)
Add to cart
Annual Magazine 2023, Cordless drills, DEWALT, Festive Savings 2024, Power Tools, POWER TOOLS, Power Tools
R3,099.00
DCD776SA2
2 x 1.5Ah Li-ion batteries
13mm Key-less chuck
Var/Rev 2-Speed: 0-450/1500Rpm
Impact rate: 0-7650/25500Bpm
15 Torque settings, max 42Nm
Carry case and 100pc bit accessories case included
3 Year online warranty
Add to cart
Annual Magazine 2023, Cordless drills, DEWALT, Festive Savings 2024, Power Tools, POWER TOOLS, Power Tools
R6,799.00
DCD996P2
New XRP brushless heavy-duty motor
13mm Robust metal keyless chuck
Var/Rev 3-speed: 0-450/1300/2000Rpm
Max impact rate: 38250Bpm
Max torque: 95Nm
Battery status indicator and 3-stage LED
Carry case included
3-year warranty (registration required)
Add to cart
R5,999.00
DCD796P2
New XR brushless motor
13mm Metal keyless chuck
Var/Rev 2-speed: 0-550/0-2000Rpm
Max impact rate: 34000Bpm
Max torque: 70Nm • Carry case included
1 Year warranty
Read more
